ASCOM D62 - Manual de usuario descargar pdf (Pagina 83)

TD 92477GB

2009-12-08/ Ver. C

User Manual

Ascom d62 DECT Handset

A.4 Headsets

A number of Bluetooth headsets for different work situations have been tested together

with the handset. Refer to the Ascom Wireless Extranet Website for a list of verified

Bluetooth headsets.

Since the Bluetooth supports the Bluetooth 2.0 standard, other headsets may also work

although not verified by Ascom.

Note: Your Bluetooth headset may have more or less functions than described here, refer

to the Manual for the Bluetooth headset.

A.5 Operation

Step between the menus with the navigation key . Confirm each menu selection by

pressing the Soft key "Select".

A.5.1 Enable Bluetooth

To enable the Bluetooth function enter in the handset menu, select Bluetooth and

select “Enable”.

A.5.2 Pair and Connect a Bluetooth Headset

Before a headset can be used a connection (pairing) between the headset and the handset

must be established.

1 Place the Bluetooth headset and the handset next to each other.

2 On the handset enter in the menu, select “Bluetooth” > “Headset”, > “Add

new”.

3 Put the headset in pairing mode

and press the soft key "OK". The handset starts

to search for the headset.

4 The headset is displayed in the handset menu “Headset found”. Press the Softkey

"Select" on the handset to select the headset. The pairing starts.

5 A PIN-code is requested for the Bluetooth headset. Enter the PIN-code

and press

"Select" on the handset. “Pairing successful” is displayed.

6 The paired headset is displayed in the handset menu “Headset”. When pairing a

new headset it is automatically connected and will be used for calls.

A.5.3 Add another Bluetooth Headset

Up to four headsets can be paired to the handset, but only one at a time can be selected.

To pair another headset repeat section “Pair and Connect a headset” steps 1-6.

The paired headsets are displayed by a default name in the handset menu “Headset”. See

A.5.6 Change the name of Bluetooth headset

A.5.4 Select a Bluetooth Headset

To activate a Bluetooth headset, enter in the handset menu, select “Bluetooth” >

“Headset”. Step with the navigation key, or to the headset to be selected and press

the soft key "Select", "Connection successful" is displayed. The headset is now selected.

1.For instruction, see headset manual.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 89 90 91

Comentarios a estos manuales

Sin comentarios

ASCOM D62 - Manual de usuario Pagina 83

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ASCOM D62 -