ASCOM D62 - Manual de usuario descargar pdf (Pagina 49)

TD 92477GB

2009-12-08/ Ver. C

User Manual

Ascom d62 DECT Handset

Connect Bluetooth Barcode Reader

This can only be done if Bluetooth connection is enabled and if the Bluetooth barcode

reader is in pairing mode. See Enable Bluetooth Connection, user manual for the

Bluetooth barcode reader, and 7.9 Send Data with Bluetooth Barcode Reader on page 39.

1 Select "Bluetooth".

2 Select "Barcode reader"

3 Select "Add new". A dialog window "Put barcode reader in pairing mode" is

displayed.

4 Press "OK". It will now search for a Bluetooth barcode reader for connection.

5 When Bluetooth barcode reader is found, press "Pair".

6 Enter PIN code, see user manual for the Bluetooth barcode reader.

7 Press "OK". "Successful pairing" will be displayed if the pairing mode was

successful.

9.1.2 Headset

In order to achieve optimal audio quality with the different headset types, it is

recommended to select the corresponding headset profile.

The default setting is microphone on a boom, that is, the audio is optimized for using a

headset with microphone on a boom. The headset profile can be changed in the menu by

do as follows:

1 Select "Headset".

2 Select the corresponding headset profile from list, that is, "Mic on boom", "Mic on

cable", "Hearing protection", or "Customized headset profile"

3 Press "Select".

9.1.3 System

Change System

Select “Automatic” or a specific system. If the handset is set to “Automatic” it selects a

system according to the priority list, see Priority on page 44.

Subscribe System

The handset can subscribe up to eight different systems. To subscribe a new system, the

“Park:” (Portable Access Right Key) and “Ac:” (Authentication code) related to the system

are needed. Contact the system administrator for more information.

Note: The PARK code may not be needed if there is no alien DECT system within the

coverage area.

The IPDI code is a unique code which has been assigned to the handset, see also 10.1

Admin Menu on page 63.

1 Enter the menu by pressing the “Menu” soft key.

2 Select in the menu.

1.This is a license dependent feature, and requires that the handset’s hardware supports Bluetooth.

2.Only visible if the headset profile has been configured in the PDM.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 90 91

Comentarios a estos manuales

Sin comentarios

ASCOM D62 - Manual de usuario Pagina 49

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ASCOM D62 -