ASCOM D62 - Manual de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
TD 92477GB
2009-12-08/ Ver. C
User Manual
Ascom d62 DECT Handset
50
The handset sends an absence reason code
1
to the system by establishing a call. The call
will automatically be disconnected after a few seconds.
Deactivate the Absence Setting
1 Enter “Call service” in the menu.
2 Select “Deactivate”.
3 Press "Select".
Divert Calls
The user can divert calls to another extension.
1 Select "Divert calls".
Divert Internal/External Calls
1 Select "Internal" or "External".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press the soft key to open
the phonebook.
4Press "OK".
The handset sends a diversion reason code
1
to the system by establishing a call. The call
will automatically be disconnected after a few seconds.
To stop diversion select "Deactivate" and press the confirmation button or the Soft key
"OK".
Divert Calls if No Reply
1 Select "No reply".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press the soft key to open
the phonebook.
4Press "OK"
The handset sends a diversion reason code
2
to the system by establishing a call. The call
will automatically be disconnected after a few seconds.
To stop diversion select "Deactivate" and press the confirmation button or the Soft key
"OK".
Divert Calls When Busy
1 Select "When busy".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press the soft key to open
the phonebook.
4Press "OK"
1.The code is defined when configuring the absence/diversion reason in the PDM/IMS2.
2.The code is defined when configuring the absence/diversion reason in the PDM/IMS2.
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 90 91

Comentarios a estos manuales

Sin comentarios